Squashed Bugs
|
| Special case palmetto-gallberry fuel model problem |
| Description |
Incorrect results are generated for palmetto-gallberry special case fuel model for live fuel moisture less than 120%. (This is not one of the 53 standard fuel models.) |
| Reported |
Version 5.0.4 Build 305 on June 24, 2011 |
| Status |
Fixed in Version 5.0.5 Build 307 on August 12, 2011. |
|
| Two-fuel results incorrect if surface ROS not selected |
| Description |
Incorrect results are generated when surface rate of spread is not selected as an output variable for the two-fuel model option in SURFACE. |
| Reported |
Version 5.0.4 Build 305 on May 27, 2011 |
| Status |
Fixed in Version 5.0.5 Build 307 on August 12, 2011. |
|
| CONTAIN results are incorrect |
| Description |
CONTAIN uses forward rate of spread of 1.0 ch/h, ignoring ROS values that are either entered or calculated in SURFACE. |
| Reported |
Version 5.0.3 Build 301 on February 11, 2011 |
| Status |
Fixed in Version 5.0.4 Build 305 on March 6, 2011 |
|
| Incorrect effective wind speed reported for two-fuel model options and specified direction of spread |
| Description |
The wrong effective wind speed is reported when the two-fuel model options are used. The correct wind speed is used to calculate rate of spread and length-to-width ratio. This problem only occurs when Surface fire spread direction is in directions specified on the worksheet is selected. |
| Reported |
Version 5.0.2 Build 299 on August 27, 2010 |
| Status |
Fixed in Version 5.0.3 Build 301 on November 22, 2010 |
|
| Two-fuel dynamic model bug. |
| Description |
Erroneous answers were generated for the first calculation using dynamic fuel models if the previous run used static fuel models. A second calculation gave the right answer. |
| Reported |
Version 5.0.1 Build 297 on July 29, 2010 |
| Status |
Fixed in Version 5.0.2 Build 299 on August 3, 2010 |
|
| Custom fuel models don't work |
| Description |
You get an error when you try to save a custom fuel model or attach a custom fuel model folder. |
| Reported |
Version 5.0.0 Build 295 on April 9, 2010 |
| Status |
Fixed in Version 5.0.1 Build 297 on April 15, 2010 |
|
| Table of References file doesn't open |
| Description |
A file associated with a new item on the Help > Master Index doesn't open. |
| Reported |
Version 5.0.0 Build 295 on April 5, 2010 |
| Status |
Fixed in Version 5.0.1 Build 297 on April 15, 2010 |
|
| Two-fuel spread direction bug |
| Description |
Version 5.0 Beta1 (Build 289) produces wrong flame lengths for SURFACE with two-fuel model and input spread direction options. Beta2 (Build 290) is a partial fix. Correct flame length values are calculated for the two-fuel model option when a single value of spread direction is input. Multiple spread direction values are still a problem for the two-fuel model option. The bug does not occur when using a single fuel model. |
| Reported |
Version 5.0 Beta1 Build 289 and Beta2 Build 290, December 2009 |
| Status |
Fixed in Version 5.0.0 Build 295 on April 9, 2010 |
|
